优化工序和行为逻辑

Rodney Chen

2024-09-25 0fdb04b7c451d7c59b226c25425722afd3364916

 Tiger.Business.MES/WorkAction/Assembly.cs

@@ -23,7 +23,6 @@
        public MES_WO_ACTION Setting { get; set; }
        #endregion
        public List<BAS_PROD_BOM> Boms { get; set; } = new();
        public Dictionary<string, List<BAS_ITEM>> SubItemDic { get; set; } = new();
        public AssemblyInfo CurAssembly { get; set; } = new();
        #endregion Propertys & Variables

@@ -76,14 +75,20 @@
                   {
                      var subs = bom.SUB_CODE.Split(new string[] { "," }, StringSplitOptions.RemoveEmptyEntries);
                      var surItems = Biz.Db.Queryable<BAS_ITEM>().Where(q => subs.Contains(q.ITEM_CODE) && q.AUTH_ORG == CurPosition.WorkBatch.WO.AUTH_ORG).ToList();
                       if (!SubItemDic.ContainsKey(assy.ITEM_CODE))
                       {
                           SubItemDic.Add(assy.ITEM_CODE, surItems);
                       }
                        foreach (var sub in surItems)
                        {
                            if (!item.SubItems.Any(q => q.ITEM_CODE == sub.ITEM_CODE))
                            {
                                item.SubItems.Add(sub);
                            }
                        }
                   }
                   CurAssembly.Items.Add(item);
                }
            }

            CurStep.Message = Biz.L("扫描上料物料");
            CurStep.Status = StepStatus.Normal;
        }

        /// <summary>
@@ -112,7 +117,10 @@
            }

            //如果返回成功则认为当前行为可以开始执行，否则返回失败
            CurStep.Message = Biz.L("等待上料");
            CurStep.Status = StepStatus.Normal;
            action.IsSuccessed = false;
            action.Data.ShortMsg = new("等待上料", ShortMessage.Types.Normal);
            return action;
        }

@@ -144,6 +152,7 @@
                foreach (var item in CurAssembly.Items.Where(q => !q.IsFinished))
                {
                    var isOK = true;
                    var matchItem = item.ItemInfo;
                    //根据条码规则验证上料是否正确
                    if (!item.RuleCode.IsNullOrEmpty())
                    {
@@ -168,6 +177,27 @@
                            }
                        }
                    }
                    //主料验证不通过，则尝试验证替代料
                    if (!isOK && item.SubItems.Any())
                    {
                        foreach (var subItem in item.SubItems)
                        {
                            if (!subItem.RULE_CODE.IsNullOrEmpty())
                            {
                                if (!Biz.CodeRule[subItem.RULE_CODE].IsNullOrEmpty())
                                {
                                    var result = Biz.CodeRule[item.RuleCode].Verify(input.SN);
                                    //只要有一个替代料通过验证则可以上料
                                    if (result.IsSuccessed)
                                    {
                                        isOK = true;
                                        matchItem = subItem;
                                        break;
                                    }
                                }
                            }
                        }
                    }
                    //验证通过则保存上料信息
                    if (isOK)
                    {
@@ -180,11 +210,12 @@
                                {
                                    AUTH_ORG = CurPosition.WorkBatch.WO.AUTH_ORG,
                                    AUTH_PROD = CurPosition.CurLine.LINE_CODE,
                                    WIP_ID = wipSn.ID,
                                    SN = input.SN,
                                    PROD_SN = wipSn.SN,
                                    ITEM_CODE = item.ItemInfo.ITEM_CODE,
                                    ITEM_CODE = matchItem.ITEM_CODE,
                                    QTY = 1,
                                    UNIT = item.ItemInfo.UNIT,
                                    UNIT = matchItem.UNIT,
                                    WORK_ORDER = wipSn.WORK_ORDER,
                                    BATCH_NO = wipSn.BATCH_NO,
                                    ROT_CODE = wipSn.ROT_CODE,
@@ -203,55 +234,68 @@
                        }
                        else 
                        {
                            var record = new MES_WIP_ASSY()
                            foreach (var wipSn in CurPosition.CurWipSNs)
                            {
                                AUTH_ORG = CurPosition.WorkBatch.WO.AUTH_ORG,
                                AUTH_PROD = CurPosition.CurLine.LINE_CODE,
                                SN = input.SN,
                                PROD_SN = CurPosition.CurSN,
                                ITEM_CODE = item.ItemInfo.ITEM_CODE,
                                QTY = 1,
                                UNIT = item.ItemInfo.UNIT,
                                WORK_ORDER = CurPosition.CurWipSNs.First().WORK_ORDER,
                                BATCH_NO = CurPosition.CurWipSNs.First().BATCH_NO,
                                ROT_CODE = CurPosition.CurWipSNs.First().ROT_CODE,
                                NODE_ID = CurPosition.CurWipSNs.First().NODE_ID,
                                NODE_NAME = CurPosition.CurWipSNs.First().NODE_NAME,
                                FTY_CODE = CurPosition.CurWipSNs.First().FTY_CODE,
                                WS_CODE = CurPosition.CurWipSNs.First().WS_CODE,
                                LINE_CODE = CurPosition.CurWipSNs.First().LINE_CODE,
                                POST_CODE = CurPosition.CurWipSNs.First().POST_CODE,
                                OPER_CODE = CurPosition.CurWipSNs.First().OPER_CODE,
                                SEGMENT = CurPosition.CurWipSNs.First().SEGMENT,
                            };
                            item.Records.Add(record);
                                var record = new MES_WIP_ASSY()
                                {
                                    AUTH_ORG = CurPosition.WorkBatch.WO.AUTH_ORG,
                                    AUTH_PROD = CurPosition.CurLine.LINE_CODE,
                                    WIP_ID = wipSn.ID,
                                    SN = input.SN,
                                    PROD_SN = wipSn.SN,
                                    ITEM_CODE = matchItem.ITEM_CODE,
                                    QTY = 1,
                                    UNIT = matchItem.UNIT,
                                    WORK_ORDER = wipSn.WORK_ORDER,
                                    BATCH_NO = wipSn.BATCH_NO,
                                    ROT_CODE = wipSn.ROT_CODE,
                                    NODE_ID = wipSn.NODE_ID,
                                    NODE_NAME = wipSn.NODE_NAME,
                                    FTY_CODE = wipSn.FTY_CODE,
                                    WS_CODE = wipSn.WS_CODE,
                                    LINE_CODE = wipSn.LINE_CODE,
                                    POST_CODE = wipSn.POST_CODE,
                                    OPER_CODE = wipSn.OPER_CODE,
                                    SEGMENT = wipSn.SEGMENT,
                                };
                                item.Records.Add(record);
                            }

                            if (item.Records.Sum(q => q.QTY) >= item.LoadQty * CurPosition.CurWipSNs.Count)
                            if (item.Records.Sum(q => q.QTY) / item.Records.Count >= item.LoadQty * CurPosition.CurWipSNs.Count)
                           {
                              item.IsFinished = true;
                           }
                        }

                        CurStep.Message = Biz.L("上料成功");
                        CurStep.Status = StepStatus.Success;
                        action.IsSuccessed = true;
                       action.Data.Data = CurAssembly;
                       //action.LocaleMsg = new Locale($"扫描物料[{item.ItemInfo.ITEM_NAME}({item.ItemInfo.ITEM_CODE})的条码[{input.SN}]成功，请继续上料");
                       action.LocaleMsg = new Locale("MES.WorkAction.Assembly.LoadSuccess", item.ItemInfo.ITEM_NAME, item.ItemInfo.ITEM_CODE);
                        action.Data.ShortMsg = new("上料成功", ShortMessage.Types.Success);
                        action.Data.Data = CurAssembly;
                        //action.LocaleMsg = new Locale($"扫描物料[{matchItem.ITEM_NAME}({matchItem.ITEM_CODE})的条码[{input.SN}]成功，请继续上料");
                        action.LocaleMsg = new Locale("MES.WorkAction.Assembly.LoadSuccess", matchItem.ITEM_NAME, matchItem.ITEM_CODE);

                        //上料完成
                        if (CurAssembly.IsFinished)
                        {
                            action = End();
                            action = End(input);
                        }
                        return action;
                    }
                }
                //都没有物料验证通过，则返回错误信息
                CurStep.Message = Biz.L("上料失败");
                CurStep.Status = StepStatus.Error;
                action.IsSuccessed = false;
                action.Data.ShortMsg = new("上料失败", ShortMessage.Types.Failed);
                //action.LocaleMsg = new($"条码[{input.SN}]验证失败，不是以下物料的条码：{string.Join("，", CurAssembly.Items.Where(q => !q.IsFinished).Select(q => $"{q.ItemInfo.ITEM_NAME}({q.ItemInfo.ITEM_CODE})"))}");
                action.LocaleMsg = new("MES.WorkAction.Assembly.LoadFail", input.SN, string.Join("，", CurAssembly.Items.Where(q => !q.IsFinished).Select(q => $"{q.ItemInfo.ITEM_NAME}({q.ItemInfo.ITEM_CODE})")));
            }
            catch (System.Exception ex)
            {
                CurStep.Message = Biz.L("上料异常");
                CurStep.Status = StepStatus.Error;
                action.Data.ShortMsg = new("上料异常", ShortMessage.Types.Exception);
                action.CatchExceptionWithLog(ex, $"上料行为：验证条码[{input.SN}]并保存数据异常");
                action.IsSuccessed = false;
                //action.LocaleMsg = new($"验证条码[{input.SN}]并保存数据异常，工序已重置，请重新扫描进站产品条码");
@@ -265,7 +309,7 @@
        /// 结束执行工序行为
        /// </summary>
        /// <returns></returns>
        public ApiAction<SubmitOutput> End()
        public ApiAction<SubmitOutput> End(SubmitInput input)
        {
            var action = new ApiAction<SubmitOutput>(new SubmitOutput());

@@ -277,6 +321,7 @@
                {
                    AUTH_ORG = CurPosition.WorkBatch.WO.AUTH_ORG,
                    AUTH_PROD = CurPosition.CurLine.LINE_CODE,
                    WIP_ID = wipSn.ID,
                    HIS_ID = CurPosition.CurWipSNHiss.First(q => q.SN == wipSn.SN).ID,
                    SN = wipSn.SN,
                    STATUS = wipSn.STATUS,
@@ -294,7 +339,11 @@
                    POST_CODE = wipSn.POST_CODE,
                    OPER_CODE = wipSn.OPER_CODE,
                    SEGMENT = wipSn.SEGMENT,
                    FLOW_SN = wipSn.FLOW_SN,
                    TRAY_SN = wipSn.TRAY_SN,
                    INNER_SN = wipSn.INNER_SN,
                    CARTON_SN = wipSn.CARTON_SN,
                    PALLET_SN = wipSn.PALLET_SN,
                    OPERATION_TIME = DateTime.Now,
                    SFTS_CODE = wipSn.SFTS_CODE,
                    SFT_CODE = wipSn.SFT_CODE,
@@ -303,26 +352,33 @@
                    ACT_SN = wipSn.SN,
                    ACT_VALUE_1 = CurAssembly.ToJson(),
                    ACT_RESULT = "Y",
                    ELAPSED_TIME = CurStep.GetElapsedTime().TotalMilliseconds.ToInt64(),
                    TRACE_INFO = $"以下物料上料完成：{string.Join(",", CurAssembly.Items.Select(q => $"{q.ItemInfo.ITEM_NAME}({q.ItemInfo.ITEM_CODE})"))}",
                };
                wipActs.Add(wipAct);
            }


            //创建变量克隆对象用于传入DBSubmitAction中保存当前需要暂存的数据值
            var _wipActs = wipActs.Clone();
            //整理上料记录
            var records = new List<MES_WIP_ASSY>();
            var _records = new List<MES_WIP_ASSY>();
            foreach (var item in CurAssembly.Items)
            {
                records.AddRange(item.Records);
                _records.AddRange(item.Records.Clone());
            }

            //保存数据
            CurStep.DBSubmitAction = () =>
            {
                var db = CurPosition.GetCommitDB();
                db.Storageable(wipActs, CurPosition.UserCode).ExecuteCommand();
                db.Insertable(records, CurPosition.UserCode).ExecuteCommand();
                db.Storageable(_wipActs, CurPosition.UserCode).ExecuteCommand();
                db.Insertable(_records, CurPosition.UserCode).ExecuteCommand();
            };

            IsFinished = true;
            CurStep.Message = Biz.L("上料完成");
            CurStep.Status = StepStatus.Finished;
            action.Data.ShortMsg = new("上料完成", ShortMessage.Types.Success);
            //action.LocaleMsg = new($"以下物料上料完成：{string.Join("，", CurAssembly.Items.Select(q => $"{q.ItemInfo.ITEM_NAME}({q.ItemInfo.ITEM_CODE})"))}");
            action.LocaleMsg = new("MES.WorkAction.Assembly.LoadFinish", string.Join("，", CurAssembly.Items.Select(q => $"{q.ItemInfo.ITEM_NAME}({q.ItemInfo.ITEM_CODE})")));
            return action;